Individual Inlet Pages - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
218

Individual Inlet Pages

You can view all inlet information, configure inlet-related settings, or reset the
inlet active energy on each individual inlet's page.
Inlet thresholds, once enabled, help you identify whether the inlet enters the
warning or critical level. In addition, you can have PX3TS automatically
generate alert notifications for any warning or critical status. See
and Actions (on page 375).
Generic inlet information shown:
•
Inlet power overview, which is the same as
•
A list of inlet sensors with more details. Number of available inlet sensors
depends on the model.
▪
Sensors show both readings and states.
▪
Sensors in warning or critical states are highlighted in yellow or red.
See Yellow- or Red-Highlighted Sensors
•
Inlet's power chart, which is the same as
page 187)
To customize the inlet's name:
1. Click Edit Settings.
2. Type a name for the inlet.
▪
For example, you can name it to identify the power source.
3. Click Save. The inlet's custom name is displayed on the Inlet or Dashboard
page, followed by its label in parentheses.
To reset this inlet's active energy:
Only users with the "Admin" role assigned can reset active energy readings.
1. Click .
2. Click Reset on the confirmation message.
This inlet's active energy reading is then reset to zero.
Event Rules
Inlets (on page 216).
(on page 264).
Dashboard - Inlet History (on