Table of Contents
Advertisement
Chapter 7: Using the Web Interface
Field/setting
User entry object class The object class for user entries.
User search subfilter
Active Directory
domain
364
Description
▪ Usually it is inetOrgPerson.
Search criteria for finding LDAP user objects within the directory tree.
The name of the Active Directory Domain.
▪ Example: testradius.com
4.
To verify if the authentication configuration is set correctly, click Test
Connection to check whether the PX3TS can connect to the new server
successfully.
Tip: You can also test the connection on the Authentication page after
finishing adding servers. See
(on page 366).
5.
Click Add Server. The new LDAP server is listed on the Authentication page.
6.
To add more servers, repeat the same steps.
7.
In the Authentication Type field, select LDAP. Otherwise, the LDAP
authentication does not work.
8.
Click Save. The LDAP authentication is now in place.
To duplicate LDAP/LDAPS server settings:
If you have added any LDAP/LDAPS server to the PX3TS, and the server you will
add shares identical settings with an existing one, the most convenient way is
to duplicate that LDAP/LDAPS server's data and then revise the IP address/host
name.
1.
Repeat Steps 1 to 2 in the above procedure.
2.
Select the "Copy settings from existing LDAP server" checkbox.
3.
Click the "Select LDAP Server" field to select the LDAP/LDAPS server whose
settings you want to copy.
4.
Modify the IP Address/Hostname field.
5.
Click Add Server.
Managing External Authentication Settings
Advertisement
Table of Contents
Troubleshooting
