LEGRAND Raritan PX3TS User Manual page 386

Chapter 7: Using the Web Interface
366
4. To verify if the authentication configuration is set correctly, click Test
Connection to check whether the PX3TS can connect to the new server
successfully.
Tip: You can also test the connection on the Authentication page after
finishing adding servers. See
(on page 366).
5. Click Add Server. The new Radius server is listed on the Authentication
page.
6. To add more servers, repeat the same steps.
7. In the Authentication Type field, select Radius. Otherwise, the Radius
authentication does not work.
8. Click Save. Radius authentication is now in place.
Managing External Authentication Settings
Choose Device Settings > Security > Authentication to open the Authentication
page, where you can:
•
Enable both the external and local authentication
•
Edit or delete a server
•
Resort the access order of servers
•
Test the connection to a server
•
Disable external authentication without removing servers
To test, edit or delete a server, or resort the server list:
1. Select a server in the list.
2. Perform the desired action.
▪
Click Edit to edit its settings, and click Modify Server to save changes.
For information on each field, see
page 362) or Adding Radius Servers
▪
Click Delete to delete the server, and then confirm the operation.
▪
Click Test Connection to verify the connection to the selected server.
User credentials may be required.
▪
Click or
the access priority, and click Save Order to save the new sequence.
Managing External Authentication Settings
Adding LDAP/LDAPS Servers
(on page 365).
to change the server order, which determines
(on