Table of Contents
Advertisement
Chapter 7: Using the Web Interface
236
▪
To retrieve the exact data at a particular time, hover your mouse over
the data line in the chart. Both the time and data are displayed as
illustrated below.
To configure this outlet's threshold settings:
Per default, there are pre-defined RMS voltage and current threshold values in
related fields. See
Default Voltage and Current Thresholds
can modify the defaults as needed.
Note: The threshold values set for an individual outlet will override the bulk
threshold values, if any, stored on that particular outlet. See
for Outlet Thresholds
(on page 225).
1.
If the outlet's threshold data is invisible, click the Thresholds title bar to
display it.
2.
Click the desired sensor (required), and then click Edit Thresholds.
3.
Make changes as needed.
(on page 842). You
Bulk Configuration
Advertisement
Table of Contents
Troubleshooting
