Creating An Outlet Group - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
240
Then you can perform one of the following actions on one or multiple outlet
groups:
•
Power on, off or cycle the selected group(s). See
Control (on page 241).
•
Observe the power status of each outlet group and/or power status of
each member outlet.
•
Re-name a group or change its member outlets. See
Group (on page 244).

Creating an Outlet Group

You can create an outlet group if you often have to power on, off or cycle the
same outlets at a regular interval.
Note that an outlet can be the member outlet of one or multiple groups.
To create an outlet group, you must have either permission below.
•
Administrator Privileges
•
Change Pdu, Inlet, Outlet & Overcurrent Protector Configuration
To create an outlet group:
1. Click
2. Type the group name.
3. Select the outlets you want in the Available field.
▪
To select all outlets of the PDU, click Select All.
4. To delete any selected outlet(s), click an outlet's
▪
To remove all selected outlets, click Deselect All.
5. Click Save.
Tip: PX3TS allows you to assign the same name to diverse outlet groups. If this
really occurs, you still can identify different groups through their unique index
numbers.
Outlet Group Power
.
Modifying an Outlet
in the Selected field.