LEGRAND Raritan PX3TS User Manual page 853

Interface
ETH1
ETH2
WIRELESS
BRIDGE
2. Separate the converted ASCII codes with a colon, and a prefix "00:" must
be added to the beginning of the converted codes.
For example, the converted client identifier of the ETH1 interface looks like
the following:
00:50:45:47:31:41:30:30:30:30:33
3. Now enter the converted client identifier with the following syntax.
host mypx {
option dhcp-client-identifier = 00:50:45:47:31:41:30:30:30:30:33;
fixed-address 192.168.20.1;
}
Illustration without ASCII code conversion:
1. Use the original client identifier of the desired network interface. DO NOT
convert them into ASCII codes.
2. A prefix "\000" must be added to the beginning of the client identifier.
For example, the client identifier of the ETH1 interface looks like the
following:
\000PEG1A00003
3. Now enter the original client identifier with the following syntax. The client
identifier is enclosed in quotation marks.
host mypx {
option dhcp-client-identifier = "\000PEG1A00003";
fixed-address 192.168.20.1;
}
Appendix J: Additional PX3TS Information
Client identifier conversion
PEG1A00003 = 50 45 47 31 41 30 30 30 30 33
PEG1A00003-ETH2 = 50 45 47 31 41 30 30 30 30 33 2D 45
54 48 32
▪ The suffix comprising the dash symbol and the word
"ETH2" is also converted.
PEG1A00003-WIRELESS = 50 45 47 31 41 30 30 30 30 33 2D
57 49 52 45 4C 45 53 53
▪ The suffix comprising the dash symbol and the word
"WIRELESS" is also converted.
PEG1A00003 = 50 45 47 31 41 30 30 30 30 33
833