Table of Contents
Advertisement
Chapter 9: Using the Command Line Interface
548
Variables:
•
<n> is the environmental sensor number. The environmental sensor
number is the ID number assigned to the sensor, which can be found on
the Peripherals page of the PX3TS web interface.
Displayed information:
•
Without the parameter "details," only the reading, threshold, deassertion
hysteresis and assertion timeout settings of the specified environmental
sensor are displayed.
•
With the parameter "details," more sensor information is displayed,
including resolution and range.
Note: For a state sensor, the threshold-related and accuracy-related data is
NOT available.
Environmental Sensor Default Thresholds
This command syntax shows a certain sensor type's default thresholds, which
are the initial thresholds applying to the specified type of sensor.
#
show defaultThresholds <sensor type>
To show detailed information, add the parameter "details" to the end of the
command.
#
show defaultThresholds <sensor type> details
Variables:
•
<sensor type> is one of the following numeric sensor types:
Sensor types
absoluteHumidity
relativeHumidity
temperature
airPressure
airFlow
vibration
Description
Absolute humidity sensors
Relative humidity sensors
Temperature sensors
Air pressure sensors
Air flow sensors
Vibration sensors
Advertisement
Table of Contents
Troubleshooting
