Ocps - LEGRAND Raritan PX3TS User Manual

OCPs

The OCPs page is available only when your PX3TS has overcurrent
protectors, such as circuit breakers. Note that the Overcurrent Protectors
section shows information of the circuit breakers for protecting outlets, NOT
the fuses for protecting the inlet transfer switch.
Each overcurrent protector on the PX3TS draws power from the active inlet
and delivers power to associated outlets. These overcurrent protectors prevent
outlets from overload by controlling the input current flowing through
associated outlets.
The OCPs page lists all overcurrent protectors as well as their status. If any OCP
trips or its current level enters the alarmed state, it is highlighted in red or
yellow. See Yellow- or Red-Highlighted Sensors
To open the OCPs page, click 'OCPs' in the
You can go to each OCP's data/setup page by clicking its name on this page.
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List (on page 179).
Overcurrent protector overview:
•
OCP status - open (tripped) or closed
•
Current drawn, rated current and current bar
▪
The smaller, gray text adjacent to "current drawn" is the rated current
of each OCP.
▪
The RMS current bars change colors to indicate the status if the OCP
thresholds have been configured and enabled.
Chapter 7: Using the Web Interface
(on page 264).
Menu (on page 176).
249