Table of Contents
Advertisement
Chapter 9: Using the Command Line Interface
546
Overcurrent Protector Sensor Threshold Information
This command is only available for models with overcurrent protectors for
protecting outlets.
This command syntax shows the specified overcurrent protector sensor's
threshold-related information.
#
show sensor ocp <n> <sensor type>
To show detailed information, add the parameter "details" to the end of the
command.
#
show sensor ocp <n> <sensor type> details
Variables:
•
<n> is the number of the overcurrent protector whose sensors you want to
query.
•
<sensor type> is one of the following sensor types:
Sensor type
current
Displayed information:
•
Without the parameter "details," only the reading, state, threshold,
deassertion hysteresis and assertion timeout settings of the specified
overcurrent protector sensor are displayed.
•
With the parameter "details," more sensor information is displayed,
including resolution and range.
Description
Current sensor
Advertisement
Table of Contents
Troubleshooting
