How The Automatic Management Function Works; Time Units - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface
214
Format Description
Rack units The height of the Z coordinate is measured in standard
rack units.
When this is selected, you can type a numeric value in
the rack unit to describe the Z coordinate of any
environmental sensors or actuators.
Free-form Any alphanumeric string can be used for specifying the
Z coordinate. The value comprises 0 to 24 characters.
2. Configure Z coordinates on the
273).

How the Automatic Management Function Works

This setting is configured on
After enabling the automatic management function:
When the total number of managed sensors and actuators has not reached the
upper limit yet, PX3TS automatically brings newly-connected environmental
sensors and actuators under management after detecting them.
PX3TS can manage up to 32 sensors/actuators.
After disabling the automatic management function:
PX3TS no longer automatically manages any newly-added environmental
sensors and actuators, and therefore neither ID numbers are assigned nor
sensor readings or states are available for newly-added ones.
You must manually manage new sensors/actuators. See
258).

Time Units

If you choose to type a new value in the time-related fields, such as the "Idle
timeout period" field, you must add a time unit after the numeric value. For
example, you can type '15 s' for 15 seconds.
Note that different fields have different range of valid values.
Time units:
Unit Time
ms millisecond(s)
s second(s)
min minute(s)
h hour(s)
Individual Sensor/Actuator Pages
Peripherals (on page 258).
(on page
Peripherals (on page