Reset Buttons - LEGRAND Raritan PX3TS User Manual

Reset Buttons

The PX3TS front panel has two reset buttons, which are functionally different.
"RESET" button near the LCD display:
The RESET button resets the control board associated with front panel
connection ports and the LCD display.
Pressing this reset button restarts the PX3TS software without any loss of
power to outlets.
The PX3TS can be reset to its factory default values using this button when a
serial connection is available. See
PX3TS:
PX3TS-iX7:
"RESET 2" button near the Alarm indicator lamps:
Pressing this button resets the inlet transfer switch and all inlet power indicator
lamps without interrupting the operation of the connected equipment.
Chapter 6: Using the PX3TS
Resetting to Factory Defaults (on page 775).
163