LEGRAND Raritan PX3TS User Manual page 381

Special note about the AES cipher:
The PX3TS device's TLS-based protocols support AES 128- and 256-bit ciphers.
The exact cipher to use is negotiated between PX3TS and the client (such as a
web browser), which is impacted by the cipher priority of PX3TS and the client's
cipher availability/settings.
Tip: To force PX3TS to use a specific AES cipher, refer to your client's user
documentation for information on configuring AES settings.
Gathering LDAP/Radius Information
It requires knowledge of your AA server settings to configure the PX3TS for
external authentication. If you are not familiar with these settings, consult your
AA server administrator for help.
Information needed for LDAP authentication:
•
The IP address or hostname of the LDAP server
•
Whether the Secure LDAP protocol (LDAP over TLS) is being used
▪
If Secure LDAP is in use, consult your LDAP administrator for the CA
certificate file.
•
The network port used by the LDAP server
•
The type of the LDAP server, usually one of the following options:
▪
OpenLDAP
▪ If using an OpenLDAP server, consult the LDAP administrator for
the Bind Distinguished Name (DN) and password.
▪
Microsoft Active Directory
▪ If using a Microsoft Active Directory server, consult your AD
administrator for the name of the Active Directory Domain.
•
Bind Distinguished Name (DN) and password (if anonymous bind is NOT
used)
•
The Base DN of the server (used for searching for users)
•
The login name attribute (or AuthorizationString)
•
The user entry object class
•
The user search subfilter (or BaseSearch)
Information needed for Radius authentication:
•
The IP address or host name of the Radius server
•
Authentication protocol used by the Radius server
•
Shared secret for a secure communication
•
UDP authentication port and accounting port used by the Radius server
Chapter 7: Using the Web Interface
(AD)
®
361