LEGRAND Raritan PX3TS User Manual page 500

Transfer switch
Table of Contents

Advertisement

Chapter 7: Using the Web Interface
480
Note: On startup, PX3TS performs all of its functions, including event rules and
logs, based on the new configuration you have copied instead of the previous
configuration prior to the device reset. For example, the "Bulk configuration
copied" event is logged only when the new configuration file contains the "Bulk
configuration copied" event rule.
The last configuration-copying record:
If you once copied any bulk configuration or device backup file to the PX3TS,
the last record similar to the following is displayed at the bottom of both the
Bulk Configuration and Backup/Restore pages.
Tip: The date and time shown on the PX3TS web interface are automatically
converted to your computer's time zone. To avoid time confusion, it is
suggested to apply the same time zone settings as those of PX3TS to your
computer or mobile device.
Alternatives:
To use a different bulk configuration method, refer to:
Bulk Configuration via SCP
Bulk Configuration or Firmware Upgrade via DHCP/TFTP
Configuration or Firmware Upgrade with a USB Drive
Raw Configuration Upload and Download
Tip: Both methods of uploading 'bulk configuration' file or 'raw configuration'
file via SCP can serve the purpose of bulk configuration. The only difference is
that you can configure device-specific settings with the upload of raw
configuration but not with the 'bulk configuration' file.
Bulk Configuration Restrictions
Before performing bulk configuration, make sure your source and target
devices are compatible devices for sharing general settings.
Restrictions for bulk configuration:
The target device must be running the same firmware version as the
source device.
The target device must be of the same model type as the source device.
Bulk configuration is permitted if the differences between the target and
source devices are only "mechanical" designs which are indicated in the
model name's suffix.
For example, you can perform bulk configuration between
PX3-4724-E2N1K2 and PX3-4724-E2N1K9 since the only difference
between the two models is their chassis colors represented by K2 (blue)
and K9 (gray).
(on page 712)
(on page 769)
(on page 746)
(on page 731)

Advertisement

Table of Contents
loading

Table of Contents