LEGRAND Raritan PX3TS User Manual page 679

Parameters
certificate
allowExpiredCertificate
<allow_exp_cert>
bindDN <bind_DN>
bindPassword
sortPosition <position>
config:# authentication ldap modify 1 host 192.168.3.3
config:# authentication ldap modify 1 host 192.168.3.3 port 633
config:# authentication ldap modify 1 host 192.168.3.3 port 633
serverType activeDirectory
Description
Re-upload a different certificate.
a. First add the "certificate" parameter to the command, and
press Enter.
b. The system prompts you for the input of the certificate.
c. Type or copy the content of the certificate in the CLI and press
Enter.
Determine whether to accept a certificate which is expired or not
valid yet.
▪ <allow_exp_cert> determines whether to accept an expired or
not valid yet certificate
▪ <allow_exp_cert> values include: true, and false
Change the bind DN.
▪ <bind_DN> is the new bind DN.
Change the bind DN password.
a. First add the "bindPassword" parameter to the command, and
press Enter.
b. The system prompts you for the input of the password.
c. Type the password and press Enter.
Change the priority of the server (that is, resorting).
▪ <position> is the new sequential number of the server in the
LDAP server list.
Note: For details of the above variables' values, see
page 652).
Examples:
•
Change the IP address of the 1st LDAP server
•
Change both the IP address and TCP port of the 1st LDAP server
•
Change the IP address, TCP port and the type of the L1st DAP server
Chapter 9: Using the Command Line Interface
Adding an LDAP Server (on
659