Blade Extension Strip Settings - LEGRAND Raritan PX3TS User Manual

Blade Extension Strip Settings

This command shows the information of a blade extension strip, including the
total number of tag ports, and if available, the ID (barcode) number of any
connected tag.
# show bladeSlot <n> <rack_unit> <slot>
Variables:
•
<n> is the number of the FEATURE port where the selected asset strip is
physically connected. For the PX3TS device with only one FEATURE port,
the number is always 1.
•
<rack_unit> is the index number of the desired rack unit (tag port) on the
selected asset strip. The index number is available on the asset strip or the
Asset Strip page of the web interface.
•
<slot> is one of the options: all or a specific number of a tag port on the
blade extension strip.
Option Description
all Displays the information of all tag ports on the
specified blade extension strip connected to a
particular rack unit.
Tip: You can also type the command without adding
this option "all" to get the same data.
A specific Displays the information of the specified tag port on
number the blade extension strip connected to a particular rack
unit.
The number of each tag port on the blade extension
strip is available on the Asset Strip page.
Chapter 9: Using the Command Line Interface
555