LEGRAND Raritan PX3TS User Manual page 631

config:# security ipAccessControl ipv6 rule add <direction> <ip_mask> <policy> <insert>
<rule_number>
-- OR --
config:# security ipAccessControl ipv6 rule add <direction> <insert> <rule_number>
<ip_mask> <policy>
Variables:
•
•
•
•
•
<direction> is one of the options: in or out.
Direction Description
in Inbound traffic.
out Outbound traffic.
<ip_mask> is the combination of the IP address and subnet mask values (or
prefix length), which are separated with a slash. For example, an IPv4
combination looks like this: 192.168.94.222/24.
<policy> is one of the options: accept, drop or reject.
Policy Description
accept Accepts traffic from/to the specified IP address(es).
drop Discards traffic from/to the specified IP address(es),
without sending any failure notification to the source
or destination host.
reject Discards traffic from/to the specified IP address(es),
and an ICMP message is sent to the source or
destination host for failure notification.
<insert> is one of the options: insertAbove or insertBelow.
Option Description
insertAbove Inserts the new rule above the specified rule number.
Then:
new rule's number = the specified rule number
insertBelow Inserts the new rule below the specified rule number.
Then:
new rule's number = the specified rule number + 1
<rule_number> is the number of the existing rule which you want to insert
the new rule above or below.
Chapter 9: Using the Command Line Interface
611