LEGRAND Raritan PX3TS User Manual page 302

Chapter 7: Using the Web Interface
282
Field Description
Numbering mode The rack unit numbering method in a rack/cabinet.
▪ Top-Down: The numbering starts from the
▪ Bottom-Up: The numbering starts from the
Numbering offset The start number in the rack unit numbering.
For example, if this value is set to 3, then the first
number is 3, the second number is 4, and so on.
Orientation The asset strip's orientation by indicating the
location of its RJ-45 connector.
▪ Top Connector: The RJ-45 connector is located
▪ Bottom Connector: The RJ-45 connector is
Asset strips can detect their strip orientation and
show it in this field.
You need to adjust this value only when your asset
strips are the oldest ones without tilt sensors
implemented.
Color with Click this field to determine the LED color denoting
connected tag the presence of an asset tag.
▪ Default is green.
Color without Click this field to determine the LED color denoting
connected tag the absence of an asset tag.
▪ Default is red.
For color settings, there are two ways to set the color.
▪
Click a color in the color palette.
highest rack unit of a rack/cabinet.
lowest rack unit of a rack/cabinet.
on the top.
located on the bottom.