LEGRAND Raritan PX3TS User Manual page 360

Chapter 7: Using the Web Interface
340
Configuring SNMP Settings
You can enable or disable SNMP communication between an SNMP manager
and the PX3TS. Enabling SNMP communication allows the manager to retrieve
and even control the power status of each outlet.
Besides, you may need to configure the SNMP destination(s) if the built-in
"System SNMP Notification Rule" is enabled and the SNMP destination has not
been set yet. See Event Rules and Actions
To configure SNMP communication:
1. Choose Device Settings > Network Services > SNMP.
(on page 375).