Serial Port Configuration Commands - LEGRAND Raritan PX3TS User Manual

Mode Description
blinkSlow This mode has the LED blink slowly.
blinkFast This mode has the LED blink quickly.
Examples
This section illustrates several asset management examples.
Example 1 - Asset Strip LED Colors for Disconnected Tags
This command syntax sets the LED color for all rack units on the asset sensor #1
to BLACK (that is, 000000) to indicate the absence of a connected asset tag.
config:# assetStrip 1 LEDColorForDisconnectedTags #000000
Note: Black color causes the LEDs to stay off.
Example 2 - Rack Unit Naming
The following command assigns the name "Linux server" to the rack unit whose
index number is 25 on the asset sensor#1.
config:# rackUnit 1 25 name "Linux server"

Serial Port Configuration Commands

A serial port configuration command begins with serial.
Chapter 9: Using the Command Line Interface
693