LEGRAND Raritan PX3TS User Manual page 367

Enabling Service Advertising
The PX3TS advertises all enabled services that are reachable using the IP
network. This feature uses DNS-SD (Domain Name System-Service Discovery)
and MDNS (Multicast DNS). The advertised services are discovered by clients
that have implemented DNS-SD and MDNS.
The advertised services include the following:
•
HTTP
•
HTTPS
•
Telnet
•
SSH
•
Modbus
•
json-rpc
•
SNMP
By default, this feature is enabled.
Enabling this feature also enables Link-Local Multicast Name Resolution
(LLMNR) and/or MDNS, which are required for resolving APIPA host names. See
APIPA and Link-Local Addressing
The service advertisement feature supports both IPv4 and IPv6 protocols.
If you have set a preferred host name for IPv4 and/or IPv6, that host name can
be used as the zero configuration .local host name, that is,
<preferred_host_name>.local, where <preferred_host_name> is the preferred
host name you have specified for PX3TS. The IPv4 host name is the first priority.
If an IPv4 host name is not available, then use the IPv6 host name.
Note: For information on configuring IPv4 and/or IPv6 network settings, see
Wired Network Settings
To enable or disable service advertising:
1. Choose Device Settings > Network Services > Service Advertising.
2. To enable the service advertising, select either or both checkboxes.
▪
To advertise via MDNS, select the Multicast DNS checkbox.
▪
To advertise via LLMNR, select the Link-Local Multicast Name
Resolution checkbox.
3. Click Save.
(on page 6).
(on page 311).
Chapter 7: Using the Web Interface
347