LEGRAND Raritan PX3TS User Manual page 555

Interface Description
all Show the non-IP settings of all interfaces.
Tip: You can also type the command without adding
this option "all" to get the same data. That is, show
network interface.
Network Service Settings
This command shows the network service settings only, including the Telnet
setting, TCP ports for HTTP, HTTPS, SSH and Modbus/TCP services, and SNMP
settings.
# show network services <option>
Variables:
•
<option> is one of the options: all, http, https, telnet, ssh, snmp, modbus
and zeroconfig.
Option Description
all Displays the settings of all network services, including
HTTP, HTTPS, Telnet, SSH and SNMP.
Tip: You can also type the command without adding
this option "all" to get the same data.
http Only displays the TCP port for the HTTP service.
https Only displays the TCP port for the HTTPS service.
telnet Only displays the settings of the Telnet service.
ssh Only displays the settings of the SSH service.
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP service.
zeroconfig Only displays the settings of the zero configuration
advertising.
Chapter 9: Using the Command Line Interface
535