Power Cycling The Outlet(S) - LEGRAND Raritan PX3TS User Manual

Chapter 9: Using the Command Line Interface
700
Option Description
A range of Switches OFF multiple, consecutive outlets.
outlets with a
For example, to specify 6 consecutive outlets -- 3, 4, 5,
hyphen in
6, 7, 8, type:
between
outlets 3-8.
If you entered the command without "/y", a message appears, prompting you
to confirm the operation. Then:
▪
Type y to confirm the operation, OR
▪
Type n to abort the operation

Power Cycling the Outlet(s)

This section applies to outlet-switching capable models only.
This command power cycles one or multiple outlets.
# power outlets <numbers> cycle
To quicken the operation, you can add the parameter "/y" to the end of the
command, which confirms the operation.
# power outlets <numbers> cycle /y
Variables:
•
<numbers> is one of the options: all, an outlet number, a list or a range of
outlets.
Option Description
all Power cycles all outlets.
A specific outlet Power cycles the specified outlet.
number
A comma- Power cycles multiple, inconsecutive or consecutive
separated list of outlets.
outlets
For example, to specify 7 outlets -- 2, 4, 9, 11, 12, 13
and 15, type:
outlets 2,4,9,11-13,15.