Chapter 6: Using the PX3TS
142
Operating the Dot-Matrix LCD Display
Enter manual mode when you want to operate the dot-matrix LCD display. You
can use the dot-matrix LCD display to:
•
Show information of the PX3TS, built-in components, or connected
peripheral devices
•
Control actuators if any
•
Control outlets if your model supports outlet-switching
Color changes of the display's top and bottom bars:
•
In the manual mode, both the top and bottom bars will turn yellow or red
to indicate the presence of any alert. For color definitions, see
Red-Highlighted Sensors
Screen with yellow bars
All alerts enter the warning level only.
•
Both bars turn black when there are NO alerts.
Screen with black bars
(on page 264).
Screen with red bars
Partial or all alerts enter the critical level.
Yellow- or