LEGRAND Raritan PX3TS User Manual page 672

Chapter 9: Using the Command Line Interface
652
Option Description
radius Enable Radius authentication.
•
<option2> is one of the options: true or false.
Option Description
true Remote authentication is the first priority. The device
will switch to local authentication when the remote
authentication is not available.
false Always stick to remote authentication regardless of
the availability of remote authentication.
LDAP Settings
All LDAP-related commands begin with authentication ldap.
If you enable LDAP authentication, you must add at least one LDAP server.
Later you can modify or delete any existing LDAP server as needed.
Adding an LDAP Server
Adding an LDAP server requires the entry of quite a lot of parameters, such as
the server's IP address, TCP port number, Base DN and so on.
You can repeat the following CLI command to add more than one LDAP server.
Tip: If any LDAP server's settings are identical to an existing LDAP server's, you
can add it by just copying the existing one, instead of using the following
command. See Copying an Existing Server's Settings
Add a new LDAP server:
(on page 656).