Control Of The Switcher - LEGRAND C2G C2G41604 Manual

4-Port HDMI Switch - 4K 60Hz

Control of the Switcher

You can choose to control the switcher through the Front panel button, IR remote, automatic switching function or RS232 (API Commands) control.
Front Panel Button Control
IR Remote Control
The Switcher can be controlled by the IR remote provided. Point the remote directly at the IR extension cable connected to the "IR Ext." port and
switch to the desired input source.
Switch to previous
source input
Switch to a specific
source input (1-4)
Note:
Since the encoding format for IR codes above is NEC (38KHz), please ensure any third-party device used to IR control the switcher supports NEC (38KHz).
Switch to next
source input
This button is not
available
4
Press the switch button to cycle
through multiple active sources
Button IR Codes Description
Switch to next active
0x02 0x0a
source input (Cycle 1→4).
Switch to previous active
0x02 0x08
source input (Cycle 4→1).
1 0x02 0x04 Switch to source input 1.
2 0x02 0x05 Switch to source input 2.
3 0x02 0x06 Switch to source input 3.
4 0x02 0x0c Switch to source input 4.
5 N/A Not available.
(us)