Table of Contents
Advertisement
Chapter 7: Using the Web Interface
412
b. In the 'Number of retries' field, specify the number of times you want
to re-send the inform communication if it fails. For example, inform
communications are re-sent up to 5 times when the initial
communication fails.
4.
For both SNMP TRAPS and INFORMS, enter the following as needed and
then click OK to apply the settings:
a.
Host name
b. Port number
c.
User ID for accessing the host -- make sure the User ID has the
SNMPv3 permission.
d. Select the host security level
Security level
"noAuthNoPriv"
"authNoPriv"
"authPriv"
Start or Stop a Lua Script
If you have created or loaded a Lua script file into the PX3TS, you can have that
script automatically run or stop in response to a specific event.
For instructions on creating or loading a Lua script into this product, see
Scripts
(on page 456).
To automatically start or stop a Lua script:
1.
Choose Device Settings > Event Rules >
2.
Select 'Start/stop Lua script' from the Action list.
3.
In the Operation field, select 'Start script' or 'Stop script.'
Description
Select this if no authorization or privacy protocols are
needed.
Select this if authorization is required but no privacy
protocols are required.
•
Select the authentication protocol - MD5 or SHA
•
Enter the authentication passphrase and then
confirm the authentication passphrase
Select this if authentication and privacy protocols are
required.
•
Select the authentication protocol - MD5 or SHA
•
Enter the authentication passphrase and confirm
the authentication passphrase
•
Select the Privacy Protocol - DES or AES
•
Enter the privacy passphrase and then confirm the
privacy passphrase
Lua
.
Advertisement
Table of Contents
Troubleshooting
