Table of Contents
Advertisement
Chapter 3: Initial Installation and Configuration
28
•
Do NOT connect cascaded devices other than master to the LAN or WLAN.
•
(WIFI only) You must use Raritan's USB WIFI wireless LAN adapter instead
of other WIFI adapters for wireless network connection.
Troubleshooting:
When a networking issue occurs, check the cascading connection and/or
software settings of all devices in the chain. See
(on page 845).
Cascading All Devices via USB
You must set the cascading mode before establishing the chain. See
Cascading Mode
(on page 328).
Any certified USB 2.0 cable up to 5 meters (16 feet) long can be used.
Both cascading modes support a maximum of 16 devices in a chain.
The following diagram illustrates PX3TS devices cascaded via USB.
Cascading Troubleshooting
Setting the
Advertisement
Table of Contents
Troubleshooting
