LEGRAND Raritan PX3TS User Manual page 73

c. Connect this adapter's RJ-45 connector to the PDU's RJ-45 SENSOR
port.
2. Connect DPX sensor packages to any of the four OUT ports on the hub.
This diagram illustrates a configuration with a sensor hub connected.
The PX3TS device
RJ-12 to RJ-45 adapter
Raritan-provided phone cable
DPX-ENVHUB4 sensor hub
DPX sensor packages
Using an Optional DPX-ENVHUB2 cable
A Raritan DPX-ENVHUB2 cable doubles the number of connected
environmental sensors per SENSOR port.
This cable supports DPX sensor packages only. Do NOT connect DPX2, DPX3, DX
or DX2 sensor packages to it.
To connect DPX sensor packages via the DPX-ENVHUB2 cable:
1. Use an RJ-12 to RJ-45 adapter to connect the DPX-ENVHUB2 cable to
PX3TS.
a. Connect the adapter's RJ-12 connector to the cable.
b. Connect the adapter's RJ-45 connector to the RJ-45 SENSOR port on
the PX3TS.
Chapter 4: Connecting External Equipment (Optional)
53