Peripherals - LEGRAND Raritan PX3TS User Manual

Chapter 7: Using the Web Interface

Peripherals

258
If there are Raritan environmental sensor packages connected to the PX3TS,
they are listed on the Peripherals page. See
Sensor Packages (on page 41).
An environmental sensor package comprises one or some of the following
sensors/actuators:
•
Numeric sensors: Detectors that show both readings and states, such as
temperature sensors.
•
State sensors: Detectors that show states only, such as contact closure
sensors.
•
Actuators: An actuator controls a system or mechanism so it shows states
only.
PX3TS communicates with managed sensors/actuators only and retrieves their
data. It does not communicate with unmanaged ones. See
Unmanaged Sensors/Actuators
When the number of "managed" sensors/actuators has not reached the
maximum, PX3TS automatically brings newly-detected sensors/actuators under
management by default.
One PX3TS can manage a maximum of 32 sensors/actuators.
Note: To disable the automatic management function, refer to the final table in
this section. You need to manually manage a sensor/actuator only when it is
not under management.
When any sensor/actuator is no longer needed, you can unmanage/release it.
Open the Peripheral Devices page by clicking Peripherals in the
176). Then you can:
•
Perform actions on multiple sensors/actuators by using the
control/action icons on the top-right corner.
Connecting Raritan Environmental
(on page 266).
Managed vs
Menu (on page