Ipsec Tunnel Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

ipsec tunnel profile

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ipsec tunnel profile profileName [ virtual-router vrName ]
no ipsec tunnel profile profileName
Command introduced in JunosE Release 7.3.0.
Creates or configures a tunnel profile for IPSec and accesses the IPSec Tunnel Profile
Configuration mode (config-ipsec-tunnel-profile). The no version deletes the tunnel
profile.
profileName—Name of the tunnel profile
vrName—Name of the VR on which you want to create the profile. If you do not specify
a virtual router, the current virtual router context is used
Global Configuration
Chapter 10: I Commands
1007