Vtep Group Member Remote; Vxlan Tunnel Arp-Learning Disable - H3C MSR 5600 Comware 7 Vxlan Command Reference

Related commands

vtep group member remote

vtep group member remote
Use vtep group member remote to specify a VTEP group and its member VTEPs.
Use undo vtep group member remote to remove a VTEP group and its member VTEPs.
Syntax
vtep group group-ip member remote member-ip&<1-8>
undo vtep group group-ip member remote
Default
No VTEP group is specified.
Views
System view
Predefined user roles
network-admin
Parameters
group-ip : Specifies a VTEP group by its group IP address.
member-ip&<1-8> : Specifies a space-separated list of up to eight member VTEP IP addresses.
Examples
# Specify VTEP group 1.1.1.1 and its member VTEPs at 2.2.2.2, 3.3.3.3, and 4.4.4.4.
<Sysname> system-view
[Sysname] vtep group 1.1.1.1 member remote 2.2.2.2 3.3.3.3 4.4.4.4
Related commands
vtep group member local

vxlan tunnel arp-learning disable

Use vxlan tunnel arp-learning disable to disable remote ARP learning for VXLANs.
Use undo vxlan tunnel arp-learning disable to enable remote ARP learning for
VXLANs.
Syntax
vxlan tunnel arp-learning disable
undo vxlan tunnel arp-learning disable
Default
Remote ARP learning is enabled for VXLANs.
Views
System view
Predefined user roles
network-admin
38