Vtep Group Member Remote - H3C MSR 810 Command Reference Manual

Default
A VTEP is not assigned to any VTEP group.
Views
System view
Predefined user roles
network-admin
Parameters
group-ip : Specifies a VTEP group by its group IP address. The IP address must already exist on
the local VTEP.
member-ip
already exist on the local VTEP.
Usage guidelines
Member VTEPs in a VTEP group cannot use the group IP address or share an IP address.
Examples
# Assign the local VTEP to VTEP group 1.1.1.1, and specify 2.2.2.2 as the member VTEP IP address
of the local VTEP.
<Sysname> system-view
[Sysname] vtep group 1.1.1.1 member local 2.2.2.2
Related commands

vtep group member remote

vtep group member remote
Use
vtep group member remote
Use
undo vtep group member remote
Syntax
vtep group group-ip member remote member-ip&<1-8>
undo vtep group group-ip member remote
Default
No VTEP group is specified.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies a VTEP group by its group IP address.
group-ip
member-ip&<1-8>
Examples
# Specify VTEP group 1.1.1.1 and its member VTEPs at 2.2.2.2, 3.3.3.3, and 4.4.4.4.
<Sysname> system-view
[Sysname] vtep group 1.1.1.1 member remote 2.2.2.2 3.3.3.3 4.4.4.4
: Specifies the member VTEP IP address for the local VTEP. The IP address must
: Specifies a space-separated list of up to eight member VTEP IP addresses.
to specify a VTEP group and its member VTEPs.
to remove a VTEP group and its member VTEPs.
46