Display Bgp Ipv6 Peer - H3C S7500E Series Command Manual

Command Manual – IPv6 Routing
H3C S7500E Series Ethernet Switches
Examples
# Display IPv6 BGP path information.
<Sysname> display bgp ipv6 paths
Address
0x5917098
0x59171D0
Table 5-3 Description on the fields of the display bgp ipv6 paths command
Field
Address
Hash
Refcount
MED
Path
Origin

5.1.13 display bgp ipv6 peer

Syntax
display bgp ipv6 peer [ ipv6-group-name log-info | ipv6-address { log-info | verbose }
| verbose ]
View
Any view
Parameters
ipv6-group-name: Name of an IPv6 peer group, a string of 1 to 47 characters.
Hash Refcount
1 1
9 2
Route destination address in local database, in dotted
hexadecimal notation
Hash index
Count of routes that used the path
MED of the path
AS_PATH attribute of the path, recording the ASs it has passed,
for avoiding routing loops
Origin attribute of the route, which can take on one of the following
values:
Indicates the route is interior to the AS.
i
Summary routes and routes defined using the network
command are considered IGP routes.
Indicates that a route is learned from the exterior
e
gateway protocol (EGP).
Short for INCOMPLETE. It indicates that the origin of a
route is unknown and the route is learned by other
?
means. BGP sets Origin attribute of routes learned from
other IGP protocols to INCOMPLETE.
5-11
Chapter 5 IPv6 BGP Configuration Commands
MED Path/Origin
0 i
0 100i
Description