Display Interface Vsi-Interface - H3C CR16000-F Command Reference Manual

Views
VSI interface view
Predefined user roles
network-admin
Parameters
text : Specifies a description, a case-sensitive string of 1 to 255 characters.
Examples
# Configure the description as gateway for VXLAN 10 for VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] description gateway for VXLAN 10

display interface vsi-interface

Use display interface vsi-interface to display information about VSI interfaces.
Syntax
display
[ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi-interface [ vsi-interface-id ] : Specifies VSI interfaces. If you specify a VSI
interface, this command displays information about the specified interface. If you specify only the
vsi-interface keyword, this command displays information about all VSI interfaces. If you do
not specify the vsi-interface [ vsi-interface-id ] option, this command displays
information about all interfaces. Make sure the specified VSI interfaces have been created on the
device.
brief : Display brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description : Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of interface descriptions.
down : Displays interfaces that are physically down as well as the down reason. If you do not specify
this keyword, the command does not filter output by physical interface state.
Examples
# Display information about VSI-interface 100.
<Sysname> display interface vsi-interface 100
Vsi-interface100
Current state: UP
Line protocol state: UP
Description: Vsi-interface100 Interface
Bandwidth: 1000000 kbps
interface [ vsi-interface [ vsi-interface-id ] ] [ brief
38