Description; Display Interface Vsi-Interface - H3C MSR 810 Command Reference Manual

[Sysname-Vsi-interface100] default
This command will restore the default settings. Continue? [Y/N]:y

description

Use description
Use
undo description
Syntax
description text
undo description
Default
The description of a VSI interface is interface-name plus Interface (for example, Vsi-interface100
Interface).
Views
VSI interface view
Predefined user roles
network-admin
Parameters
: Specifies a description, a case-sensitive string of 1 to 255 characters.
text
Examples
# Configure the description as gateway for VXLAN 10 for VSI-interface 100.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] description gateway for VXLAN 10

display interface vsi-interface

Use
display interface vsi-interface
Syntax
display
[ description | down ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi-interface [ vsi-interface-id ]
the specified VSI interface has been created on the device. If you do not specify the
vsi-interface [ vsi-interface-id ]
interfaces except for VA interfaces. If you specify only the
command displays information about all VSI interfaces. If you specify a VSI interface, this command
to configure the description of a VSI interface.
to restore the default.
interface [ vsi-interface [ vsi-interface-id ] ] [ brief
to display information about VSI interfaces.
: Specifies a VSI interface by its number. Make sure
option, this command displays information about all
vsi-interface
37
keyword, this