Display Pim Routing-Table - H3C S3600 Series Command Manual

Command Manual – Multicast
H3C S3600 Series Ethernet Switches-Release 1510
Table 6-3 Description on the fields of the display pim neighbor command
Neighbor Address
Interface
Uptime
Expires

6.1.8 display pim routing-table

Syntax
display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } ] ] |
**rp [ rp-address [ mask { mask-length | mask } ] ] } | { group-address [ mask
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] } * } |
incoming-interface { interface-type interface-number | null } | { dense-mode |
sparse-mode } ] *
View
Any view
Parameter
*g: Specifies a (*, G) route entry.
mask: IP address mask.
mask-length: Length of IP address mask.
**rp: Specifies a (*, *, RP) route entry.
rp-address: RP address.
group-address: Address of the multicast group.
source-address: Address of the multicast source.
incoming-interface interface-type interface-number: Displays the route entry whose
incoming VLAN interface is the specified VLAN interface.
null: Specifies the VLAN interface type as NULL.
dense-mode: Specifies the multicast routing protocol as PIM-DM.
sparse-mode: Specifies the multicast routing protocol as PIM-SM.
Description
Use the display pim routing-table command to display information about the PIM
multicast routing table.
Field
Neighbor address
VLAN interface on which the neighbor has been discovered
Time elapsed since the multicast group was discovered
Specifies when the member will be removed from the group
Chapter 6 PIM Configuration Commands
Description
6-8