Display Pim Routing-Table - H3C s3600 series Command Manual

View
Any view
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display pim neighbor command to display the PIM neighbor information.
With an interface specified, the command displays the PIM neighbor information on the specified
interface; otherwise, the command displays the PIM neighbor information on all interfaces.
Examples
# Display the PIM neighbor information on all interfaces.
<Sysname> display pim neighbor
Neighbor Address
8.8.8.6
8.8.7.6
Table 3-3 display pim neighbor command output description
Field
Neighbor Address
Interface Name
Uptime
Expires

display pim routing-table

Syntax
display pim routing-table [ { { *g [ group-address [ mask { mask-length | mask } ] ] | **rp [ rp-address
[ mask { mask-length | mask } ] ] } | { group-address [ mask { mask-length | mask } ] | source-address
[ mask { mask-length | mask } ] } * } | incoming-interface interface-type interface-number |
{ dense-mode | sparse-mode } ] *
View
Any view
Parameters
*g: Specifies a (*, G) entry.
**rp: Specifies a (*, *, RP) route entry.
rp-address: RP address.
group-address: Multicast group address, in the range of 224.0.0.0 to 239.255.255.255.
source-address: Multicast source address.
Interface Name
VLAN-interface10
VLAN-interface11
Neighbor address
VLAN interface on which the neighbor has been discovered
Time elapsed since the multicast group was discovered
Remaining lifetime of the PIM neighbor
3-6
Uptime Expires
1637 89
1636 88
Description