Display Pim Rp-Info - H3C s3600 series Command Manual

Field
Flag
Uptime
Timeout in 197 sec
Upstream interface
Upstream neighbor
RPT neighbor
Downstream interface list

display pim rp-info

Syntax
display pim rp-info [ group-address ]
View
Any view
Parameters
group-address: Multicast group address. With this argument provided, the command displays the RP
information about the specified multicast group; otherwise, the command displays the RP information
about all multicast groups.
Description
Use the display pim rp-info command to display the RP information of the multicast group.
The output of this command also includes BSR and static RP information.
Examples
# Display the RP information about all multicast groups.
<Sysname> display pim rp-info
PIM-SM RP-SET information:
BSR is: 4.4.4.6
Group/MaskLen: 224.0.0.0/4
RP 4.4.4.6
Version: 2
Priority: 0
Uptime: 00:39:50
Flag of (S, G) or (*, G) entry in the PIM routing table:
SPT: The (S, G) entry is on the SPT.
RPT: The (S, G) or (*, G) entry is on the RPT.
WC: Indicates the (*, G) entry.
LOC: The switch is connected with the multicast source
directly.
Time when the entry exists
The table entry will expire in 197 seconds.
Incoming interface
Upstream neighbor
For the (*, G) entry, when this switch is an RP, RPF neighbor
field of the (*, G) entry is Null.
For the (S, G) entry, when this switch is directly connected
with the source, is an RP, RPF neighbor field of the (S, G)
entry is Null.
List of downstream interfaces
3-8
Description