C-Rp Advertisement-Interval - H3C S7500E Series Command Manual

Command Manual – Multicast
H3C S7500E Series Ethernet Switches
Related commands: c-bsr.
Examples
# Configure VLAN-interface 100 to be a C-RP for multicast groups 225.1.0.0/16 and
226.2.0.0/16, with a priority of 10.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule permit source 225.1.0.0 0.0.255.255
[Sysname-acl-basic-2000] rule permit source 226.2.0.0 0.0.255.255
[Sysname-acl-basic-2000] quit
[Sysname] pim
[Sysname-pim] c-rp vlan-interface 100 group-policy 2000 priority 10

4.1.12 c-rp advertisement-interval

Syntax
c-rp advertisement-interval interval
undo c-rp advertisement-interval
View
PIM view
Parameters
interval: C-RP-Adv interval in seconds, with an effective range of 1 to 65,535.
Description
Use the c-rp advertisement-interval command to configure the interval at which
C-RP-Adv messages are sent.
Use the undo c-rp advertisement-interval command to restore the system default.
By default, the C-RP-Adv interval is 60 seconds.
Related commands: c-rp.
Examples
# Set the global C-RP-Adv interval to 30 seconds.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] c-rp advertisement-interval 30
Chapter 4 PIM Configuration Commands
4-10