Display Fr Ipv6 Map - H3C MSR810 Command Reference Manual

Parameters
interface interface-type interface-number: Specifies an interface by its type and number. It can be a
main interface or subinterface. If you specify a main interface, this command displays statistics for
the main interface and its subinterfaces. If you specify a s ubinterface, this command displays
statistics for the subinterface. If you do not specify an interface, this command displays statistics for
all interfaces.
Usage guidelines
You can determine whether Frame Relay InARP is operating correctly based on the output from this
command.
Examples
# Display statistics for Frame Relay InARP packets.
<Sysname> display fr inarp
Frame relay InARP statistics for interface Serial2/1/0 (DTE)
Recvd InARP request
0
Table 62 Command output
Field
Recvd InARP request
Sent InARP reply
Sent InARP request
Recvd InARP reply
Related commands
fr inarp

display fr ipv6 map

Use display fr ipv6 map to display Frame Relay IPv6 address mapping.
Syntax
display fr ipv6 map [ static | dynamic ] [ interface interface-type interface-number
[ dlci dlci-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
static: Specifies static address mapping.
dynamic: Specifies dynamic address mapping.
interface interface-type interface-number: Specifies an interface by its type and number. It can be a
main interface or subinterface. If you specify a main interface, this command displays IPv6 address
mapping for the main interface and its subinterfaces. If you specify a subinterface, this command
displays IPv6 address mapping for the subinterface. If you do not specify an interface, this command
displays IPv6 address mapping for all interfaces.
Sent InARP reply Sent InARP request
0 1
326
Recvd InARP reply
1
Description
Number of received InARP requests.
Number of sent InARP replies.
Number of sent InARP requests.
Number of received InARP replies.