Overview Of Control Terminals - Lenze 8400 StateLine C Hardware Manual

3 Product description

Overview of control terminals

3.3 Overview of control terminals
Control terminals for devices in the StateLine version
Connection
Pos.
X1
S1
X3
X4
X5
X6 (DIAG)
x107
MMI
2 Icon
{
}
'
|
20
efesotomasyon.com - Lenze
Description
CANopen connection
CANopen settings
analog inputs/outputs; 10V reference voltage
Digital inputs; controller enable
24V supply of the control electronics
Digital outputs
24V voltage output
Digital inputs; controller enable
External 24V supply of the control electronics; internal 24V supply
fused via PTC
Diagnostic interface
24 V brake supply;
+ BD1
Connection for DC brake coil
− BD2
Slot for memory module (Memory Module Interface)
Description
Long discharge time: All power terminals remain live for a few minutes after mains
disconnection! The duration is given under the warning symbol on the device.
High discharge current: Carry out fixed installation and PE connection according to
EN 61800−5−1!
Electrostatic sensitive devices: Before working on the device, the personnel must be free of
electrostatic charge!
Hot surface: Risk of burns! Hot surfaces should not be touched without wearing protective
gloves.
l
Control terminals for devices in the HighLine version
8400HLC080a 8400HLC081a
Information
StateLine C HighLine C
^ 124
^ 129 ^ 135
−
^ 128
^ 138
^ 137
−
^ 127
^ 140
−
^ 180
EDS84ASC552 EN 6.0