ADTRAN AOS Version R10.1.0 Command Reference Manual page 2181

Command Reference Guide
frame-relay lmi-t391dte <value>
Use the frame-relay lmi-t391dte command to set the T391 signal polling timer for the data terminal
equipment (DTE) endpoint. Typical applications should leave the default value for this timer. Use the no
form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the signal polling timer for the DTE endpoint is set to 10 seconds.
Command History
Release 1.1
Functional Notes
The T391 timer sets the time (in seconds) between polls to the Frame Relay network.
Usage Examples
The following example sets the T391 timer for 15 seconds:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay lmi-t391dte 15
60000CRG0-35E
Sets the signal polling timer value in seconds. Valid range is 5 to
30 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Interface Command Set
2181