ADTRAN AOS Version R10.1.0 Command Reference Manual page 2160

Command Reference Guide
qos-policy
Use the qos-policy command to apply a previously configured quality of service (QoS) map to incoming
or outgoing packets on an interface. Use the no form of this command to remove the map from the
interface. Variations of this command include:
qos-policy in <name>
qos-policy out <name>
Syntax Description
<name>
in
out
Default Values
No default values are necessary for this command.
Command History
Release 6.1
Release 11.1
Release 15.1
Usage Examples
The following example applies the QoS map VOICEMAP to the demand 1 interface:
(config)#interface demand 1
(config-demand 1)#qos-policy out VOICEMAP
60000CRG0-35E
Specifies the name of a previously created QoS map (refer to
<name> <number> on page 1296
Assigns a QoS map to this interface's input.
Assigns a QoS map to this interface's output.
Command was introduced.
Command was expanded to include the demand interface.
Command was expanded to include the in parameter.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
for more information).
qos map
2160