Table of Contents
Advertisement
Command Reference Guide
Frame Relay Interface Command Set
Functional Notes
This command is different from ppp multilink. In ppp multilink, if multiple cross connects are configured
for the Point-to-Point Protocol (PPP) interface without multilink PPP being enabled, the first link to bring up
Link Control Protocol (LCP) will be the only link actually cross connected. In Frame Relay multilink, since
there is no protocol corresponding to LCP, all cross connects will be removed and the user will be free to
re-issue any cross connect.
Usage Examples
The following example enables the Frame Relay multilink interface and sets the time between hello
messages to 45 seconds:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay multilink hello 45
The following example specifies Class B operation:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay multilink bandwidth-class B
The following example specifies Class C operation with a threshold of 5:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay multilink bandwidth-class C 5
60000CRG0-35E
Copyright © 2012 ADTRAN, Inc.
2185
Advertisement
Table of Contents
