ADTRAN AOS Version R10.1.0 Command Reference Manual page 2179

Command Reference Guide
frame-relay lmi-n393dce <value>
Use the frame-relay lmi-n393dce command to set the N393 local management interface (LMI) monitored
event counter for the data communication equipment (DCE) endpoint. Typical applications should leave
the default value for this counter. Use the no form of this command to return to the default value.
Syntax Description
<value>
Default Values
By default, the LMI monitored event counter for the DCE endpoint is set to four events.
Command History
Release 1.1
Usage Examples
The following example sets the N393 threshold for five events:
(config)#interface frame-relay 1
(config-fr 1)#frame-relay lmi-n393dce 5
60000CRG0-35E
Sets the event counter value. Valid range is 1 to 10 events.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Interface Command Set
2179