ADTRAN AOS Version R10.1.0 Command Reference Manual page 2131

Command Reference Guide
ip policy route-map <name>
Use the ip policy route-map command to associate a route map with a network interface source. Use the
no form of this command to disable this feature.
Syntax Description
<name>
Default Values
By default, policy-based routing is disabled for all interfaces.
Command History
Release 11.1
Usage Examples
The following example associates the route map named MyMap with demand interface 1:
(config)#interface demand 1
(config-demand 1)#ip policy route-map MyMap
60000CRG0-35E
Specifies the route map to associate with this interface.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Demand Interface Command Set
2131