ADTRAN AOS Version R10.1.0 Command Reference Manual page 2173

Command Reference Guide Frame Relay Interface Command Set
encapsulation frame-relay ietf
Use the encapsulation frame-relay ietf command to configure the encapsulation on a virtual Frame Relay
interface as IETF (RFC 1490). Currently, this is the only encapsulation setting. Settings for this option
must match the far-end router's settings in order for the Frame Relay interface to become active.
Syntax Description
No subcommands.
Default Values
By default, all Frame Relay interfaces use IETF encapsulation.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example configures the endpoint for IETF encapsulation:
(config)#interface frame-relay 1
(config-fr 1)#encapsulation frame-relay ietf
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2173