ADTRAN AOS Version R10.1.0 Command Reference Manual page 2174

Command Reference Guide
fair-queue
Use the fair-queue command to enable weighted fair queuing (WFQ) on an interface. Use the no form of
this command to disable WFQ and enable first in, first out (FIFO) queueing for an interface. Variations of
this command include:
fair-queue
fair-queue <value>
WFQ must be enabled on an interface to use priority queuing. By default, WFQ is enabled
for all interfaces with maximum bandwidth speeds equivalent to T1/E1 and below.
Syntax Description
<value>
Default Values
By default, fair-queue is enabled with a threshold of 64 packets.
Command History
Release 5.1
Usage Examples
The following example enables WFQ on the interface with a threshold set at 100 packets:
(config)#interface frame-relay 1
(config-fr 1)#fair-queue 100
60000CRG0-35E
Optional. Specifies the maximum number of packets that can be present in
each conversation subqueue. Packets received for a conversation after this
limit is reached are discarded. Range is 16 to 512 packets.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
Frame Relay Interface Command Set
2174