ADTRAN AOS Version R10.1.0 Command Reference Manual page 2216

Command Reference Guide Frame Relay Subinterface Command Set
dial-backup shutdown
Use the dial-backup shutdown command to deactivate all dial-backup functionality in the unit.
Dial-backup configuration parameters are kept intact, but the unit will not initiate (or respond) to
dial-backup sequences in the event of a network outage. Use the no form of this command to reactivate the
dial-backup interface. For more detailed information on dial-backup functionality, refer to the Functional
Notes and Technology Review sections of dial-backup call-mode on page 2203.
Syntax Description
No subcommands.
Default Values
By default, all AOS interfaces are disabled.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example deactivates the configured dial-backup interface:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup shutdown
60000CRG0-35E Copyright © 2012 ADTRAN, Inc. 2216