ADTRAN AOS Version R10.1.0 Command Reference Manual page 2169

Command Reference Guide
thresholds xcv
Use the thresholds xcv command to configure the excessive code violation threshold for the interface's
link in the Ethernet in the first mile (EFM) group. When this threshold is crossed, the link is removed from
the group. Use the no form of this command to return the threshold to the default value. Variations of this
command include:
thresholds xcv 1e-5
thresholds xcv 1e-6
thresholds xcv 1e-7
Syntax Description
1e-5
1e-6
1e-7
Default Values
By default, thresholds are set to 1e-7.
Command History
Release A4.01
Functional Notes
Once the threshold is set, the command
configuration so that the interface's link is removed when the threshold is crossed.
Usage Examples
The following example specifies that the excessive code violation threshold for interfaces connected to
EFM group 1 is 1e-6:
(config)#interface efm-group 1
(config-efm-group 1)#thresholds xcv 1e-6
60000CRG0-35E
Specifies that the threshold is set at a 1e-5 bit error rate.
Specifies that the threshold is set at a 1e-6 bit error rate.
Specifies that the threshold is set at a 1e-7 bit error rate.
Command was introduced.
xcv-link-removal on page 2170
Copyright © 2012 ADTRAN, Inc.
EFM Group Command Set
must be entered in the group's
2169